accuracy of the infrared video pyrometer measurement.
1
1
2. The subject should be kept at a certain distance from the former, or the direction of the
thermal imager should be changed to avoid overlapping images from affecting the
temperature measurement. Thermal radiation can also be affected by the passing of time
by keeping your head down or wearing a hat, which should be avoided as much as
possible, otherwise the accuracy of the infrared thermometer measurements will be
affected.
3. The ambient temperature of the test should be stable and should not be measured in
areas with high airflow such as fans, air vents of air conditioners, etc. Avoid heat sources
(
e.g. drinking fountains, overhead lamps, sunlight, etc.), air outlets (e.g. ventilation doors,
fans, etc.) and infrared surveillance cameras when erecting or installing infrared video
thermometers.
1
1
1
4. When switching to a new environment, turn the product on and leave it for 10 to 15
minutes before measuring.
5. The ambient temperature should be stable and should not be measured in areas with high
airflow such as fans, air conditioning outlets, etc.
6. When the measurement object comes from a place where the temperature difference in
the measurement environment is relatively large, it is necessary to stay in the
measurement environment for 10 to 30 minutes before taking the measurement.
7. The thermal imager measures the surface temperature of the object, and if temperature
compensation is required, go to the Setup page to adjust it.
1
1
1
8. This product has a self-calibration function, if the reading has a rapid jump, please wait
for 30 seconds or so, wait for the reading to be stable before taking the measurement.
9. When the actual temperature differs from the measured temperature due to
environmental factors, the infrared video pyrometer needs to be temperature
compensated.
2
2
2
2
0. Do not start measuring other subjects immediately after measuring the temperature of an
extremely high or low temperature object, and leave for 10 minutes.
1. Infrared video thermometers should not be used in places with strong sunlight because
the radiant heat of the sunlight will affect the temperature sensor's detection.
2. The infrared image pyrometer should not be used in an electromagnetic interference
field.
3. The infrared thermometer has operating limitations in small spaces because it is too close
to focus.
BlueEyes Technology
www.BlueEyes.com.tw
