EN
󾙕󾙒󾙒󾙒
Contact us 
▪Connection Interface Description
▪Camera Setup Process
▪Notes
Connect the network cable and power adapter.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ON
OFF
RS-232
RS422
TA
TB
RA
RB
ETHERNET DC12V
POWER
1.After the device powers on and the screen displays the IP address followed by "Onvif,"
simply press the "SEARCH" key on the keyboard.
2.After the search is complete, the device will automatically display ONVIF protocol
devices within the local network.
3.Use the joystick to navigate "Up" or "Down" to select the device you want to add, then
press the "ENTER" button on the joystick to confirm and add it.
4.When adding a device, you need to enter the username, password, and CAM NUM for
the device being added.
6.After adding the device, press the "INQUIRE" button to view the added devices. Use
the joystick to navigate "Up" or "Down" to view the saved devices (use the joystick
"Right" to check the port). Press the "ENTER" button to select the camera you want to
control, or use the 【CAM】key to connect and then proceed with control.
󾙓󾙓󾙔

󾙔󾙔
󾙔
󾙔
5.After entering the details, press the "ENTER" button to save the settings.