Operation Manual

2015/10/06

www.BlueEyes.tw

Pan Tilt Driver for iCam/iCam PRO

Thank you for using the product of BlueEyes Technology.

The manual will introduce the product of BlueEyes Technology. Please read the manual

before you start using the product.

Though the information in the manual has been verified before publish, the actual

specification should be based on the actual shipment. BlueEyes Technology doesn’t

have to guarantee, proclaim or declare for the content, along with other purpose. In

addition, the product specification and information that mentioned in the manual is for

reference only. The content might be update at any time without notice. If there is any

mistake of the information, including software, firmware, and hardware that mentioned

in the manual BlueEyes Technology has no responsibility for the mistake.

Please reach BlueEyes website to get the upgrade of the product specification, our

company will not notice you. If you want to get the latest product information, operation

manual, firmware, or you have any question to the products of BlueEyes Technology,

please contact your local agent or go to the official website of BlueEyes Technology for

further information.

It is not allowed to copy/ use the content or to change the information and publishing of

the manual without BlueEyes Technology’s written consent.

BlueEyes Technology Corp.

Add: 7F-3, No.200, Sec. 4, Wenxin Rd., North District, Taichung City 40462, Taiwan

TEL: +886 4 2297 0977 / +886 982 842 977

Fax: +886 4 2297 0957

E-mail：support@blueeyes.com.tw

Website: www.BlueEyes.tw

BlueEyes Technology

www.BlueEyes.tw

1

Index

Operation manual.............................................................................................................1

1

. Description ...................................................................................................................3

1

.1 Looks..................................................................................................................................................3

.2 Specification chart.............................................................................................................................4

.3 Size chart ...........................................................................................................................................5

.4 Assemble ...........................................................................................................................................6

.5 Horizontal rotation ............................................................................................................................7

.6 Vertical rotation.................................................................................................................................8

2

. Assemble ......................................................................................................................9

2

.1 Device assemble and fix ....................................................................................................................9

2

.1.1 Fix on the wall..........................................................................................................................................9

.1.2 Assemble iCam/iCam PRO camera ........................................................................................................10

.1.3 Connect control wire .............................................................................................................................11

.1.4 Connect to power cord..........................................................................................................................12

.1.5 Connect to power cord..........................................................................................................................12

2

.2 Camera setting ................................................................................................................................13

.3 Install iCam Live monitor software..................................................................................................13

3

. Function operation (iCam Live)................................................................................... 15

3

.1 Rotation ...........................................................................................................................................15

.2 Set the speed of rotation.................................................................................................................15

.3 Preset point .....................................................................................................................................16

.4 Other order......................................................................................................................................18

BlueEyes Technology

www.BlueEyes.tw

2

1

.1 Looks

BlueEyes Technology

www.BlueEyes.tw

3

1

.2 Specification chart

Horizontal rotation angle

Vertical rotation angle

255 degrees

60 degrees

6

degrees/ second、12 degrees/ second、20

Horizontal rotation speed

degrees/ second (adjustable）

Vertical rotation speed

Left-right limitation

6 degrees/ second

left-right electricity limitation

6

degrees/ second、12 degrees/ second、20

Scan automatically

degrees/ second (adjustable)

Preset point

Home point

8 preset points

yes

Manually return function

Control method

Protocol

yes

RS-485

PelcoD

Serial transmit speed

Connector

2400

DC power + RS-485

DC 12V±5% / 100mA

1.4W

Power

Power consumptive

Work environment

0-55℃，humidity <95%(condensing)

BlueEyes Technology

www.BlueEyes.tw

4

1

.3 Size chart

BlueEyes Technology

www.BlueEyes.tw

5

1

.4 Assemble

BlueEyes Technology

www.BlueEyes.tw

6

1

.5 Horizontal rotation

BlueEyes Technology

www.BlueEyes.tw

7

1

.6 Vertical rotation

BlueEyes Technology

www.BlueEyes.tw

8

2

.1 Device assemble and fix

Please assemble the camera on the pan tile driver and fix it on the wall

by follow the steps.

2

.1.1 Fix on the wall

Please use three screws (types of screw depends on material of wall) to

fix pan tilt driver on the wall.

Attention! The pan tilt driver is not supposed to be fixed on the ceiling or

hanging. The only way to assemble the camera is fix on the pan tilt

driver, and fix the pan tilt driver on the wall vertically. As following.

If the wall is wooden, to avoid falling, be sure to make it fix steady.

BlueEyes Technology

www.BlueEyes.tw

9

2

.1.2 Assemble iCam/iCam PRO camera

Take the screws out of pan tilt driver (each one on the each side),

assembling the camera on the iCam/iCam PRO camera. Please lock the

camera back to the pan tilt driver (each one on the each side).

There is a little noise of motor when pan tilt driver is rotating. To

avoid the noise, we recommend you use input.

BlueEyes Technology

www.BlueEyes.tw

10

2

.1.3 Connect control wire

Please insert the control wire into D+ and D-. Owing to special design,

the order of D+ and D- will not affect its’ working.

Reverse side of iCam

Reverse side of iCam PRO

BlueEyes Technology

www.BlueEyes.tw

11

2

.1.4 Connect to power cord

Connect pan tilt driver “share power” to the iCam/iCam PRO

2

.1.5 Connect to power cord

Connect the one side DC12V transformer to the pan tilt driver, the other

side to socket (AC 110/220V).

When fix the pan tilt driver on the wall, please make sure using

the suitable screw based on the material of wall.

BlueEyes Technology

www.BlueEyes.tw

12

2

.2 Camera setting

Using Microsoft Internet Explorer and enter the IP of iCam/iCam PRO.

「

2400」。Please set “PTZ”, portocol set for “PelcoD” and serial transmit

speed set for “2400”.

2

.3 Install iCam Live monitor software

Please install iCam Live software into desk-top computer or notebook

(

Windows 7/8/10). Enter serial number after opening it.

BlueEyes Technology

www.BlueEyes.tw

13

Please get the serial number from consignee/commercial agent.

Please fill IP, user, pwd and click “save”.

IP

User

IP of iCam/iCam PRO.

User of iCam/iCam PRO.

Pwd

Password of iCam/iCam PRO.

Click can switch to mute.

Mute

Fullscreen

Resolution

Save

Fullscreen can make it auto-work. “Esc” can leave fullscreen.

Set camera resolution1920x1080, 1280x720.

Save presently data.

BlueEyes Technology

www.BlueEyes.tw

14

3

.1 Rotation

You can press “up”, “down”, “left”, “right” or keep pressing (keep pan tilt

driver rotating).

3

.2 Set the speed of rotation

There are three types of speed of rotation which build-in pan tilt driver.

By pressing triangle sign can switch to 6 degrees /second, 12 degrees

/

second and 20 degrees/ second.

BlueEyes Technology

www.BlueEyes.tw

15

We recommend you if the camera distance is far, switching to low

speed; distance is close, switching to high speed.

3

.3 Preset point

Set preset point can switch the monitor to different recording place.

There are 8 preset points.

Click “set” and choose “1” to set previous monitor as preset point 1.

Click “yes” to set the preset point 1.

Click “go” and choose “1” can move to preset point 1.

BlueEyes Technology

www.BlueEyes.tw

16

BlueEyes Technology

www.BlueEyes.tw

17

3

.4 Other order

Enter the other orders into the block.

BlueEyes Technology

www.BlueEyes.tw

18

Note

BlueEyes Technology

www.BlueEyes.tw

19

Note

BlueEyes Technology

www.BlueEyes.tw

20

Note

BlueEyes Technology

www.BlueEyes.tw

21

Note

BlueEyes Technology

www.BlueEyes.tw

22

©

PRINTED IN TAIWAN

This paper is for informational purposes only. BlueEyes is registered trademarks or trademarks of BlueEyes Technology Corporation. Other

product or company names mentioned herein may be the trademarks of their respective owners.